White Bathroom Vanity – The bathroom vanity is an essential bathroom accessory because it is the cabinet in which the sink or sink is installed. Sometimes vanity is replaced, usually because it is too old and damaged by water, or simply to redo the decoration of the washroom. When replacing the old vanity with a new one, it must be removed, as well as the existing sink. So we will start by unplugging and removing the plumbing from the faucet. So we make sure not to spoil it if it’s the same faucet we will reinstall on the new white bathroom vanity.
Adjustments are made to the walls and the baseboard cut at the bottom of the walls if the new bathroom furniture is larger than the old one. A small power tool such as a Dremel can be used to cut existing moldings. Once the space to fix the piece of furniture is ready, you can draw lines for the position of the new piece of furniture. If the piece of furniture is in several pieces, we can install the one that will serve as a reference for the transfer of measurements for the position of the pipes in the wall. Here, we pose the left cabinet, which serves to support the white bathroom vanity and the counter.
15 Photos Gallery of: White Bathroom Vanity Best Colour Choice
Once the cabinet is firmly in place, measure and traces the lines for cutting the panel at the bottom of the vanity. We measure and trace the lines that will form the hole for the pipes, and then cut with a jigsaw. A reasonably larger hole is made to facilitate the passage of the drain piping and the water supply valves when installing the bathroom furniture. The fixing of the back of the white bathroom vanity is done with wood screws in the studs of the frame of the wall, to ensure a good solidity. We will draw the position of the wall studs to easily screw the furniture.Incoming search terms:white bathroom vanity best colour choice